Thread cutter device EDALTOUR in the complete set

Swiss Made, with MK (Morse taper) holder, Nominal size M1 - M10, Workpiece-side mount with drill chuck, Manually operated version, delivered as a SET, assorted in suitcases
For tapping, For thread machining with dies, For through-hole and blind-hole threads, For internal and external threads


Design:
It features an integrated, adjustable safety slip clutch that can be precisely set to the maximum permissible torque of the respective tap. The device is also equipped with length compensation (tension and compression) and an automatic return mechanism that ejects the tap from the hole at increased speed as the machine spindle retracts. The system is characterized by a robust and compact design, intended for demanding industrial use.

Application:
For internal and external threads in small to medium production runs. This tool is mounted, for example, in the tailstock of a lathe. The various inserts rotate freely on their axis with the knurled handle of the holder. Tool movement is manual only. It is ideally suited for blind and through holes in a wide variety of materials.

Advantage:
The greatest advantage of the set lies in The enormous time savings and maximum protection against tool breakage are key advantages, as the slip clutch reliably prevents the tap from shearing off in case of jamming. Thanks to the automatic return, the time-consuming reversal of the machine's rotation direction is eliminated, massively increasing productivity. Furthermore, the integrated length compensation ensures perfectly accurate threads while simultaneously protecting the spindle bearings of the machine tool.

Area:
- Dies M1...M10
- Taps M1...M10
- Center and twist drills Ø 1.5...10 mm

Contents:
- 1 Tool Holder MK2
- 7 Die Holders 16 x 5, 20 x 5, 20 x 7, 25 9, 30 x 11, 38 x 10, 38 x 14 mm
- 1 tap holder including key and 3 collets Rubber Flex J423, J421, J422
- 1 drill chuck with special shank Ø 1...10 mm