Helping to avoid damage, the HG Scan PRO is a must when working on temperature-sensitive materials. The HG Scan PRO simply fits onto the hot air tool, providing intelligent data communication between both devices. It measures the temperature at the workpiece surface using infrared technology while working on it with the HG 2620 E hot air tool. An acoustic signal sounds as soon as heat exceeds or falls below the ideal temperature. A signal light on the display also indicates whether the workpiece surface is too hot or too cold. Red means too hot, green indicates that work is being done at the ideal temperature and blue means too cold. The warning tolerance range can be selected to suit individual needs. If preferred, the visual and acoustic warning signals can also be deactivated. The ideal distance from the workpiece is easily defined by means of two lasers. The ideal distance is maintained when both lasers meet on the workpiece surface. The HG Scan PRO is particularly suitable for challenging professional and industrial use because it is powered from the hot air tool, avoiding the bother of changing batteries.
Druckluft nach ISO 8573-1:2010 Material: nickel-plated brass Material release ring: POM Material of clamping ring: high-alloy stainless steel Material seal: NBR Thread type: BSPT (R) Operating temperature: -10°C to +80°C Working pressure: -0.95 to 14 bar Shape: straight shape with hexagon socket Structural design: push-pull principle